Tag Archives: hanging

madebylakshmi

October 11, 2015

Its been a very long time since I made a jewellery. Lets catch up again. The easiest and ever pretty design is the jumkhees. May be because of its elegance or because of the traditional design I am more attracted to the Jumkhee designs than any other design. This weeks jewellery is a simple yet beautiful Pink and pearl combination Jumkhee.An adorable one it will make a pretty gift as well

Pink pearls

Continue reading

Advertisements

Jewelry Of The Week – JOTW#26

Hello Buddies ­čÖé

This week’s earrings is made out of quilling paper and wooden beads. This one is little different from the regular earrings I make. But its such a simple piece of cake anyone could just make it in seconds.But It looks stylishjotw26Supplies required:

  • Quilling paper (Black Colour)
  • Head pins
  • Ear hooks
  • PInk and blue wooden Beads
  • Quilling Needle
  • Wire cutter
  • Pliers

Method :

  1. Roll a black paper into a tight circle make four of them
  2. Take a head pin Insert beads and paper roll in this order Blue bead- Black paper-Pink Bead-Black Paper-Blue bead
  3. Now form a loop above this top blue bead and cut the excess wire
  4. Connect the ear hooks to the loop
  5. Thats it ! Simple isn’t it ?
  6. Apply varnish on the earring with a small paint brush. This is to make your earring resistant to water. 
  7. Thats it pretty paper jewelry ready ­čÖé
  8. Make your own jewelry and adore yourself ­čÖé

jotw26

Do you like these stuff ? Then Follow my blog to see more of these . You can find the follow button on the right side top corner of the page, take a moment to confirm subscription by checking the confirmation e-mail in your subscribed mail-ID. Also if you are in Facebook be kind to like my page here and support me

sign

Jewellery of the week – JOTW23 – Pinks & Purples

Hello Buddies ­čÖé

This weeks Jewellery is ready ! A pink and purple combination ­čÖé This time i have used a new tool craft punches I live them they are so handy ­čÖé

JOTW23

Supplies Required :

  • Quilling Paper
  • White Glue
  • Craft Punch
  • Rhine stone
  • Jump Rings
  • Ear Hooks

My Method :

  1. Roll one strip into a tight circle
  2. Roll pink strip over the white circle then continue purple strip on thatjotw23
  3. Roll half length of pink strip into a smaller circlePINK ROLL
  4. Attach it to the larger circle
  5. Insert a jump ring into the small pink circle
  6. Add a Ear hook to the Jump ring
  7. Punch a floral punch using craft punch
  8. Stick it on the circleJOTW23
  9. Stick a Rhine stone on the flowerJOTW23
  10. Thats it Earring ready !DSC08808
  11. Apply varnish on the earring with a small paint brush. This is to make your earring resistant to water.
  12. Thats it Pretty earrings ready !
  13. Make your own jewelry and adore yourself

Do you like these stuff ? Then Follow my blog to see more of these . You can find the follow button on the right side top corner of the page, take a moment to confirm subscription by checking the confirmation e-mail in your subscribed mail-ID. Also if you are in Facebook be kind to like my page here and support me

sign

Jewellery Of The Week – JOTW 22 – Grapes

Hello Buddies ­čÖé

Its been long time since I have made an earring. Our JOTW posts were almost stopped but here we are back in track now with one of our new design of Jewelry as always a pair of quirky earrings ! Hope you like it. Here is how I made it.Grape earring

Supplies Required :

  • Quilling paper
  • Ear hooks
  • Jump ring
  • Wire cutter
  • Pliers
  • Glue
  • Varnish

My Method :

  1. Take white and green quilling paper
  2. Take three white quilling paper and roll it over a pen refill. Press it and make it into a tea drop shape
  3. Make a smaller shape with the green colour paper
  4. Next make a round shape with green colour form a circle and roll half of a white paper over it to form the top circlepieces
  5. Now insert the green tea drop inside the white tea drop shapepieces
  6. Attach the four pieces as shown in the pictureassemble
  7. Connect the jump ring inside the circle pieceloop
  8. Insert the ear hook to this jump ringsGrape earring
  9. Apply varnish on the earring with a small paint brush. This is to make your earring resistant to water.
  10. Thats it Pretty Grape wine earring ready !Grape earring
  11. Make your own jewelry and adore yourself

Do you like these stuff ? Then Follow my blog to see more of these . You can find the follow button on the right side top corner of the page, take a moment to confirm subscription by checking the confirmation e-mail in your subscribed mail-ID. Also if you are in Facebook be kind to like my page here and support me

sign

Red Bells – JOTW #16

Hello Buddies ­čÖé

This week I went back to my jumkhees ­čÖé I don’t know why but I like the jumkhee earrings more. So this week I made one Attractive red colour bell earring with white crystal hangings. It looks simple and pretty ­čÖéjotw16

Supplies required:

  • Quilling paper – Red
  • Head pins
  • Eye pins
  • Ear hooks
  • crystal beads
  • Wire cutter
  • Pliers

My Method :

  1. Roll the red colour paper first into a tight circle using quilling needle
  2. Secure the end of red paper with glue.
  3. Give a slight push in the middle of the circle from one side and raise it above to form the bell like shape for the earring.
  4. Insert a white crystal bead into a head pin and form a loop and cut the excess wire this forms the hanging part
  5. Insert a small silver bead inside a eye pin. Then insert the quilling paper inside this eye pin.
  6. Form a small loop of this eye pin and cut the excess wire
  7. Connect the hanging bead loop with this eye pin end. Now the jumkhee bell and hanging beads get connected.
  8. Insert the Ear hook in the loop above the paper bell.
  9. Apply varnish on the earring with a small paint brush. This is to make your earring resistant to water. 
  10. Thats it earring ready ­čÖéJOTW16

Do you like these stuff ? Then Follow my blog to see more of these . You can find the follow button on the right side top corner of the page, take a moment to confirm subscription by checking the confirmation e-mail in your subscribed mail-ID. Also if you are in Facebook be kind to like my page here and support me

sign

X – Ray Earring JOTW #12

Sorry Buddies I was a bit busy so couldn’t post for the past two weeks. But I am back again with the a new recycle jewelry this week ­čÖé This is a very simple and recycled earring made out of old x ray ­čÖéXray earring

Supplies required:

  • X ray
  • Gold Foil
  • Head pins
  • Ear hooks
  • Small gold beads
  • Wire cutter
  • Pliers

My Method :

  1. Cut four circles from X – Ray, two circles from golden paper.Xray earring
  2. Cut the floral pattern on 2  x-ray circles using a cutter
  3. Stick 3 circles in this order x-ray, golden paper, x ray with floral pattern
  4. Put holes on top and bottom of the circles
  5. Attach Ear hooks on top holeXray earring
  6. Connect white pearls on the bottom hole.
  7. Thats it earring ready ­čÖéjotw12

Do you like these stuff ? Then Follow my blog to see more of these . You can find the follow button on the right side top corner of the page, take a moment to confirm subscription by checking the confirmation e-mail in your subscribed mail-ID. Also if you are in Facebook be kind to like my page here and support me

sign

JOTW – Jewelry Of The Week #11

Hello Buddies ­čÖé

This weeks jewelry is a very simple and neat blue cone ­čÖéJOTW11

Supplies required:

  • Quilling paper
  • Head pins
  • Ear hooks
  • Small silver beads
  • Wire cutter
  • Pliers

My Method :

  1. Roll the blue colour paper first into a tight circle using quilling needle
  2. Secure the end of the paper with glue.
  3. Give a slight push in the middle of the circle with the help of pen from one side and raise it above to form the cone like shape for the earring.
    JOTW11
  4. Insert a small silver bead inside a eye pin. Then insert the quilling paper inside this eye pin. Again insert a silver bead above this paper cone.
  5. Form a small loop of this eye pin and cut the excess wire
  6. Insert the Ear hook in the loop above the paper cone.
  7. Using 3D gold/silver liners and make small designs on the earring.
  8. Apply varnish on the earring with a small paint brush. This is to make your earring resistant to water. 
  9. Thats it earring ready ­čÖéJOTW11

Do you like these stuff ? Then Follow my blog to see more of these . You can find the follow button on the right side top corner of the page, take a moment to confirm subscription by checking the confirmation e-mail in your subscribed mail-ID. Also if you are in Facebook be kind to like my page here and support me

sign